The Aztech DSL605ER ADSL2+ 4 Port Ethernet Router uses new Generation Texas Instruments AR7 Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. The ADSL2+ 4-Port Router also supports higher data transmission rates with ADSL2 (G.992.3), ADSL2+(G.992.5), and Extended Reach-ADSL. This next generation ADSL2+ 4-Port Router will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

Targeted at the residential and SOHO users, the ADSL2+ 4-Port Router is the ideal solution to provide a 4 in 1 device for both high speed broadband connectivity via a combined ADSL2/2+ ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Switch and true Firewall capability functionality.

Security is provided via a double Stateful Packet Inspection and NAT based Firewall. VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers. With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalization to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Support multiple WAN Connection (PVC) up to 8 Spectral compatibility with POTS F4 & F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP support Dynamic RIP routing support (with memory and firmware upgrade) IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support PVC to VLAN Mapping Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support (UPnP) SNTP Support IGMP Support (v1 and v2) DDNS (Dynamic DNS) Support QoS Support (DSCP, TOS) PPP/DHCP Auto Detection

Management Support

Web Based HTTP management GUI Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Telnet/CLI (Read Only) Syslog Support Firmware upgrade-able for future feature enhancement TR-069 support option (with memory and firmware upgrade) Diagnostic Test (DSL, OAM, Network, Ping test) TR068-WAN Access SNMP trap

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem Two-Level Password protection

Hardware

Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx) 4 MB Flash ROM 16 MB SDRAM Dying Gasp Support ITU K.21 Support GDT Support

Platform support

For Ethernet : OS Independent

Power Requirements

Input Voltage : 9V DC +/- 10% Input Current : 1.0A

Physical Specifications

LED Indicators :  - 1 x "Power" (Green and Red) LED - 4 x Ethernet Link/Activity Status (Green) LED - 1 x "DSL" Link Status (Green) LED - 1 x "Internet" (Green and Red) LED External Connectors : - 1 x RJ-11 Telephone socket for ADSL line - 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)  - 1 x DC Jack for Power Input  - 1 x Factory Default Reset Button - 1 x On/Off Power Switch Measurements :  - Dimension : 156MM x 130MM x 29MM - Weight : Approx. 350 g

Regulatory Approvals (Pending)

Asia Pacific /Europe : CE, IEC 60950 Malaysia : SIRIM Singapore : IDA (TBC) Australia : A-tick/C-tick (TBC)

Temperature

Operating : 0o to 40 o Celsius  32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit

Humidity

Operating : 8% to 95% Relative Humidity (Non-Condensing) Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.