The Aztech DSL605EU ADSL2+ Ethernet USB Combo uses the new generation Texas Instruments AR7 Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) ADSL standard. Aztech DSL605EU ADSL2+ Ethernet USB Router Modem also provides higher data transmission rates with ADSL2 (G.992.3 & G.992.4), ADSL2+ (G.992.5), Extended Reach-ADSL support. The ADSL2+ Ethernet USB Router Modem will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

The Aztech DSL605EU ADSL2+ Ethernet USB Router Modem is targeted at the residential users. Designed for High Speed Broadband Networks, the ADSL2+ Ethernet USB Router Modem is for both the single user with Bridge mode with host based PPPoE Client or for multi-users utilizing the DSL605EU inbuilt PPPoE/A, IP routing, NAT functionality to share the ADSL link.

The ADSL2+ Ethernet USB Router Modem comes with Stateful Packet Inspection firewall and DMZ support for a full security options against malicious hackers.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3(ADSL2), G.992.5(ADSL2+), RE-ADSL compliant ADSL2, ADSL2+, RE-ADSL compliant Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalization to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Multiple PVC up to 8 support (Bridge Support) Spectral compatibility with POTS F4 & F5 OAM Loopback/Send and Receive TR-067 test report available

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP support Dynamic RIP routing support (with memory and firmware upgrade) IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support (UPnP) SNTP Support IGMP Support (v1 and v2) DDNS (Dynamic DNS) Support QoS Support (DSCP, TOS) PPP/DHCP Auto Detection

Management Support

Web Based HTTP management GUI Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) Telnet/CLI (Read and Write) TR068-WAN Access Syslog Support Firmware upgrade-able for future feature enhancement TR-069 support option (with memory and firmware upgrade) SNMP trap

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem Two-Level Password protection

Hardware

Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset 4 MB Flash ROM 16 MB SDRAM Dying Gasp Support ITU K.21 Support GDT Support DSL Forum TR-068 compliant   * Feature subject to change

Platform support

For Ethernet : OS Independent For USB Windows 98SE Windows ME Windows 2000 Windows XP Mac ver 10.2 and above

Power Requirements

Input Voltage : 9V DC +/- 10% Input Current : 1A

Physical Specifications

LED Indicators :  - 1 x "Power" (Green/Red) LED - 1 x "Ethernet" Link/Activity Status (Green) LED - 1 x "USB" Status (Green) LED  - 1 x "DSL" Link Status (Green) LED - 1 x "Internet" (Green/Red) LED External Connectors : - 1 x RJ-11 Telephone socket for ADSL line - 1 x RJ45 for 10/100Base-T Ethernet (MDI-X)  - 1 x USB 1.1 Type B - 1 x DC Jack for Power Input  - 1 x Factory Default Reset Button - 1 x On/Off Push Button Switch Measurements :  - Dimension : 105 (L) x 105 (W) x 30 (H) mm - Weight : Approx. 250g

Regulatory Approvals (Pending)

Asia Pacific /Europe : CE, IEC 60950 Malaysia : SIRIM Singapore : IDA (TBC) Australia : A-tick/C-tick (TBC)

Temperature

Operating : 0o to 40 o Celsius or 32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius or -13 o to 158 o Fahrenheit

Humidity

Operating : 8% to 95% Relative Humidity (Non-Condensing) Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.