The Aztech DSL605EW ADSL2+ Wireless 4 Port Router uses new generation Texas Instruments AR7 with 1350A for wireless combined Chipset solution that fully complies with ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite), ADSL standard. The ADSL2+ Wireless 4-Port Router also provides future proof functionality with higher data transmission rates with ADSL2, ADSL2+, and Extended Reach-ADSL support. This next generation ADSL2+ Wireless 4-Port Router will be providing up to 12Mbps speed and additional 600 feet reach for ADSL2 and 26Mbps speed for distances up to 5,000 feet for ADSL2+.

The Aztech DSL605EW ADSL2+ Wireless LAN 4 Port Ethernet Router is targeted at the residential and SOHO users. Designed for high speed broadband networks, the ADSL2+ Wireless 4-Port Router is the ideal solution to provide a 6 in 1 device for both Wired and Wireless connectivity via a combined ADSL2/2+ Ready Modem support, Routing functionality for multi-user sharing, 4 port AutoMDI/MDIx 10/100 Managed Switch for future IPTV deployment, high speed 125Mbps IEEE802.11b/g/g++ Wireless LAN Access point and true firewall capability functionality.

Security for the Aztech DSL605EW ADSL2+ Wireless 802.11g++ Router is provided via a double Stateful Packet Inspection and NAT based firewall and Hardware accelerated AES/WEP/WPA based encryption/MAC Address Filtering for Wireless links. VPN Pass-through and DMZ support provide additional security support for telecommuters as well as allow flexibility while maintaining security against malicious hackers.

With Universal Plug and Play support, home networking becomes a breeze for everyone in the family. Multi Port Range/Popular Application Forwarding makes it even easier to select which application you want your network to allow while ensuring your security at the same time.

PRODUCT SPECIFICATIONS

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready Rate Adaptive modem at 32 Kbps steps Dynamic Adaptive Equalization to improve Carrier's service area Bridge Tap Mitigation support ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt) AAL ATM Attributes - AAL5 Supports 8 multiple PVC (up to 16 PVC Bridge Support) Spectral compatibility with POTS F4 & F5 OAM Loopback/Send and Receive TR-067 compliant

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support RFC2364 PPPoA Client support RFC2516 PPPoE Client support RFC2225/RFC1577 Classical IP Support Transparent Bridge Support PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support IP/TCP/UDP/ICMP/ARP/RARP Application Support Network Address Translation (NAT) Port Mapping/Forwarding/Triggering Easy setup of Port Forwarding rules for popular Games/Application NAT Application Level Gateway for popular applications DHCP Server/Relay/client DNS Relay Agent DMZ support PVC to VLAN Mapping Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support PPP Always on with configurable timeout PPP Dial on Demand Universal Plug and Play Support SNMP v1 and v2 Multi NAT support Easy Connect Support DDNS (Dynamic DNS) Support IGMP Proxy Support (IGMP v1 and v2) SNTP Support QoS Support (DSCP, TOS) PPP/DHCP Auto Detection

WLAN Support

IEEE 802.11, 802.11b and 802.11g compliant Supports 802.11b, 802.11g and 802.11g++ simultaneously Transmit output power up to 20dBm (standard) Transmit output power up to 23dBm with change to 5V high-power 1350A daughter board Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-Fi tm) Standard Support seamless WLAN roaming Frequency Band :  - 2412 MHz - 2462 MHz (North America/FCC) - 2412 MHz - 2472 MHz (ETSI/Europe) - 2412 MHz - 2484 MHz (Japan) - 2457 MHz - 2472 MHz (France) - 2457 MHz - 2462 MHz (Spain) Support Direct Sequence Spread Spectrum (DSSS) technology Modulation : OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK Wireless Media Access Protocol- CSMA/CA with ACK 64/128/256Bit WEP Encryption WPA/WPA2 Support Dynamic Rate Scaling from 125, 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s Operating Range of >300 Meters (Open Air) Extended Range with 802.11g++ support WDS Support (Wireless Distribution System) Multiple SSID Support

Management Support

Web Based HTTP management GUI TFTP/FTP Support for Firmware Upgrade Web Based Firmware Upgrade (Local) Soft Factory Reset Button via Web GUI Diagnostic Test (DSL, OAM, Network, Ping Test) TR068 - WAN Access Telnet/CLI (Read and Write) Syslog Support Firmware upgrade-able for future feature enhancement TR-069 Support with firmware upgrade SNMP trap

Security Support

NAT for basic Firewall support Packet Filtering Firewall Support Stateful Packet Inspection Support Protection against Denial of Service attacks Password Authentication to Modem Two-Level Password protection

Hardware

Texas Instrument TNETD7300EZDW (TI7200) Single Chip Network Processor/AFE/Line Driver Chipset IC Plus IP175C 5 PORT 10/100 MAC/PHY Switch (Support Auto MDI/MDIx) Texas Instrument TNETW1350A based IEEE802.11b/g Daughter Board 4 MB Flash ROM 16 MB SDRAM Dying Gasp Support ITU K.21 Support GDT Support

Platform support

For Ethernet and Wireless LAN OS Independent

Power Requirements

Input Voltage : 9V DC +/- 10% Input Current : 1.0A

Physical Specifications

LED Indicators :  - 1 x "Power" LED (Green and Red LED) - 4 x Ethernet Link Status (Green) LED - 1 x "Wireless" LAN Link/Activity Status (Green) LED  - 1 x "DSL" Status (Green) LED  - 1 x "Internet" Status (Green and Red) LED External Connectors : - 1 x RJ-11 Telephone socket for ADSL line  - 4 x RJ45 for 10/100Base-T Ethernet (AutoMDI/MDIx)  - 1 x DC Jack for Power Input  - 1 x Factory Default Reset Button - 1 x On/Off Power Switch  - 2 x 360° Rotate-able 2.4Ghz 3 dBi Antenna (deachable) Measurements :  - Dimension : 156MM x 135MM x 34MM - Weight : Approx. 250 g

Regulatory Approvals (Pending)

Asia Pacific /Europe : CE, IEC 60950 Malaysia : SIRIM Singapore : IDA (TBC) Australia : A-tick/C-tick (TBC)

Temperature

Operating : 0o to 40 o Celsius  32 o to 104 o Fahrenheit Non-Operating : -25 o to 70 o Celsius -13 o to 158 o Fahrenheit

Humidity

Operating : 8% to 95% Relative Humidity (Non-Condensing) Non-Operating : 5% to 95% Relative Humidity (Non-Condensing)

NOTE : Specifications are subject to change without prior notice.